admin. sink & faucet. September 11th , 2017.
This removal procedure is a job of a day's time. Because after the removal of the old valve you will have to take it to the hardware store to purchase a similar fit.
There are basically two types of faucets which are used - the compression or cartridge faucet and the washerless faucets. Follow the steps given below for repairing shower faucets.
Next, place a thin pipe thread and wind it around the perimeter of the stem thread. Apply pressure, and with the help of your finger push these into the faucet. Tighten the nut and bolt of the faucet with the help of a wrench. After the faucet handle has been replaced and the cap refitted, the water supply can be restored. You are finally done with the repair.
After you remove the faceplate, you will see a small screw. Remove it gently, and keep it aside, as you will need it later. Dismantle the escutcheon, which is the face plate around the fixture, by simply popping it off the wall.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Fraidnot claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.