sink & faucet. Monday , March 06th , 2017 - 00:23:11 AM
Now just as you removed the nut holding the strainer, fix it again and do the same thing with the drain tail piece.
The job can be finished in a few hours, depending on how good you are at all the plumbing maneuvers. Replacing the sink could be considerably easy, if you observe the way the whole assembly was before and reproduce it back again, as it was.
Poor water supply pressure can also be the cause of this problem. In this case, you will notice the same problem in other fixtures as well. Also, same problems will be noticed by people residing in rest of the apartments/houses in your area. This can sometimes cause low water pressure in one outlet when other taps are turned on and proper pressure when only one outlet is on. This is because distribution of water further lowers the pressure. In this case, plumber will measure the incoming pressure and flow before your regulator, so as to make sure if that is the problem. Sometimes, elevation can also be the problem. The water storage tank which is supplying water to the sink must be at higher level so that the water flows by gravity. Most of the time, water pressure could get affected due to a damaged pipeline. Major plumbing problems, like blockage or leakage of pipeline, can be the cause of reduced pressure. If this is the case, the repairs can be expensive.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Fraidnot claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.