admin. sink & faucet. September 14th , 2017.
Using a dry rag, wipe the surface of the sink in, at the spot of the strainer. Allow it to dry totally before you go ahead to the next step.
Use a screwdriver and slowly pry out the handle cover on the shower faucet handle. You will find the retaining screw beneath the shower handle cover. Remove this screw as well. Now pull the faucet off its stem so that you can see the shower head assembly.
Even a small leakage in the pipeline can affect the water pressure. You also need to check the internal pipeline supply up to the faucet for any leakage. This can be checked with help of the meter reading of your apartment. All you can do is turn off all the taps inside your home and valves (if any) that enables water to flow into your house from the common pipelines. Check the meter reading now and again after 3-4 hours of doing this. If the reading has changed, there is a leakage. Call a professional to find the leakage and fix the problem.
So, is Glacier Bay a good brand? You could consider this brand, if you have a limited budget. This brand offers fittings that are at least 2-3 times less expensive than the major brands. However, the selection of faucets is not as large as the other brands. You could check out their products at the Home Depot or you could also check out their website. The products are inexpensive. Installation is easy. If you buy their product, you will get a Glacier Bay faucets manual that contains simple drawings and instructions for simplistic installation. You could also check the website for repair instructions and If the parts seem to be cracked or damaged, you must immediately take them back to the store and get a replacement or a refund.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Fraidnot claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.